Urgent Care Fracture Care Billing & Extenders Guide

Urgent care fracture care billing and 7th character extenders guide

Fracture care billing guidelines for urgent care come down to one decision: did the provider treat the fracture, or only stabilize it? Definitive closed treatment uses a fracture code such as 25600 with a 90-day global period. A temporary splint before an orthopedic referral uses an E/M visit, a splint code such as 29125 and supplies.

This guide shows how to choose between global fracture care and splinting, which code fits each splint, how modifiers 25, 54 and 57 work, and how the ICD-10 7th character changes from the first visit to follow-up care.

Key Takeaways

  • Closed fracture treatment codes include the first cast or splint and usually carry a 90-day global period.
  • A splint applied only to protect the fracture until orthopedics sees the patient is not fracture care, so bill the E/M visit, the splint code and supplies.
  • Medicare expects modifier 54 on a 90-day fracture code whenever the clinic does not plan to provide the follow-up care, even without a written transfer.
  • Splint codes follow the length of the splint: 29105 long arm, 29125 short arm, 29130 finger, 29505 long leg and 29515 short leg.
  • The 7th character stays A while active treatment continues and changes to D for routine healing visits.

What Fracture Care Billing Guidelines Cover in Urgent Care

CPT treats most fracture treatment codes as global surgical packages. Each package pays for the treatment itself, the first cast or splint, and normal follow-up care during the global period. As a result, the clinic that bills the package takes on the follow-up visits too.

However, not every splint counts as fracture treatment. CPT states that splinting used “solely to temporarily stabilize the fracture for patient comfort is not considered closed treatment.” So when the urgent care provider splints a wrist and sends the patient to orthopedics, the clinic has not treated the fracture in CPT terms.

If the urgent care bills the full package and the orthopedist then bills its own fracture care, the payer sees two claims for one global service. That conflict ranks high on the list of ways to avoid urgent care billing mistakes.

Fracture Care Billing Guidelines: Splint and Refer, or Treat

The provider’s plan, as written in the note, decides the billing path. The codes, modifiers and supplies then follow.

Path 1: Splint and referPath 2: Definitive fracture care
What the provider doesEvaluates, X-rays, applies a temporary splint and refers to orthopedicsTreats the fracture and plans or arranges the follow-up care
Procedure codeSplint or strapping code, such as 29125 or 29515Closed treatment code, such as 25600 or 28470
Global periodSplint codes have no follow-up global daysUsually 90 days
E/M visitBillable with modifier 25 when separately identifiableBillable with modifier 57 when it includes the decision to treat
Separate splint codeYes, plus suppliesNo, the code includes the first cast or splint
Follow-up by orthopedicsOrthopedics bills its own fracture careShared through modifiers 54 and 55

For example, a note that reads “splint applied, follow up with orthopedics tomorrow” points to Path 1. In contrast, a note that reads “closed treatment of nondisplaced distal radius fracture, recheck in our clinic in one week” points to Path 2.

Closed Fracture Billing CPT Codes Urgent Care Uses

Closed fracture billing CPT codes describe treatment without surgery. Each code names the bone and whether the provider manipulated the fracture. Urgent care usually treats stable fractures without manipulation, such as:

  • 25600: closed treatment of a distal radial fracture without manipulation.
  • 25500: closed treatment of a radial shaft fracture without manipulation.
  • 26600: closed treatment of a metacarpal fracture without manipulation.
  • 28470: closed treatment of a metatarsal fracture without manipulation.
  • 28510: closed treatment of a toe fracture, other than the great toe, without manipulation.
  • 23500: closed treatment of a clavicle fracture without manipulation.

Most of these codes carry a 90-day global period, so check the global indicator in the Medicare Physician Fee Schedule before you bill. When the provider reduces the fracture, use the “with manipulation” code for that site instead, such as 25605 for a distal radius fracture.

Also, each fracture code includes the first cast or splint and its removal, so do not add a 29000-series code for it. You can still bill a later replacement cast, along with its supplies.

Urgent Care Fracture Splinting CPT Codes

When the provider does not take on fracture care, urgent care fracture splinting CPT codes describe the work. Choose the code by how far the splint extends, not by the name of the splint or the location of the injury.

CPT codeSplintCommon examplesMedicare supply codes
29105Long arm splint, shoulder to handLong arm posterior splint; a sugar-tong splint that extends above the elbowQ4017–Q4020
29125Short arm splint, forearm to hand, staticVolar wrist, ulnar gutter, thumb spica and forearm sugar-tong splintsQ4021–Q4024
29126Short arm splint, forearm to hand, dynamicDynamic forearm-to-hand splintsQ4021–Q4024
29130 / 29131Finger splint, static / dynamicFinger and mallet finger splints applied by staffQ4049 / Q4051
29505Long leg splint, thigh to ankle or toesLong leg posterior splintQ4041–Q4044
29515Short leg splint, calf to footPosterior ankle and stirrup splintsQ4045–Q4048

The supply pairings come from the CMS fracture care billing article (A53322), which lists the Q codes for each cast and splint code. In that article, Medicare pays the supply codes in addition to the payment for applying the splint. However, many commercial payers bundle supplies, so check each contract before you add them.

Prefabricated splints: Fitting an off-the-shelf splint or brace is not a 29000-series service. The fitting falls into the E/M visit, and the device itself goes on the claim under its HCPCS supply code when the payer covers it.

The 90-Day Global Period and Modifiers 54, 55 and 57

The 90-Day Global Period starts on the day of treatment and runs for 90 days after it. Routine follow-up visits belong to the package, so when two practices share the care, modifiers split the payment.

Modifier 54: Surgical Care Only

Modifier 54 tells the payer that the billing provider treated the fracture but will not provide the follow-up care. Since 2025, Medicare expects modifier 54 on every 90-day global code when the provider plans to furnish only the procedure. That includes informal hand-offs without a written transfer agreement. The CMS Global Surgery Booklet describes the transfer of care rules.

Then the orthopedist who takes over the follow-up bills the same fracture code with modifier 55 and the same date of service. On the CMS-1500, that claim lists the dates of postoperative care in item 19. If the orthopedist never received a formal transfer, Medicare instead allows add-on code G0559 once during the global period, alongside the E/M visit.

Modifier 57: Decision for Treatment

For 90-day global codes, the package includes an E/M visit on the day of treatment or the day before. So when the visit leads to the decision to treat the fracture, add modifier 57 to the E/M code. Without it, Medicare denies the visit as part of the global package.

Modifiers 25 and 24

Modifier 25 belongs with procedures that have a 0- or 10-day global period, such as a splint application. Use it when the E/M work goes beyond the usual work of applying the splint, as our modifier 25 and modifier 59 billing guide explains. Later, during the global period, modifier 24 marks a visit for a problem unrelated to the fracture.

7th Character Extender Fracture Coding

The diagnosis has to match the phase of care. In 7th character extender fracture coding, the letter describes the stage of treatment, not whether the visit is the patient’s first or second.

  • Initial Encounter (7th Character A): a closed fracture while the patient receives active treatment, such as the urgent care evaluation and the first orthopedic visit that starts definitive care.
  • B: the initial encounter for an open fracture.
  • Subsequent Encounter (7th Character D): routine healing visits, such as cast changes, splint removal and healing X-rays.
  • G, K and P: later visits for delayed healing, nonunion or malunion.
  • S: a sequela, such as stiffness or arthritis that remains after the fracture heals.

For example, S52.501A reports an unspecified fracture of the lower end of the right radius at the urgent care visit. Likewise, a child’s buckle fracture of the right wrist is S52.521A at the first visit and S52.521D at a routine recheck. A patient who waits a week before seeking care still gets A, because active treatment starts at that visit.

What the Note Should Document for Fracture Care Billing

Because the note decides the billing path, it should answer the same questions every time, as fracture care billing guidelines expect. In particular, payers and auditors look for these details:

  • The fracture: the bone, the site, the side, and whether it is displaced, open or closed.
  • The treatment: temporary immobilization, or definitive closed treatment with or without manipulation.
  • The device: the type and length of the splint or cast, who applied it and the supplies used.
  • The plan: who will provide the follow-up care and when the patient should see orthopedics.
  • The visit: the history, exam and imaging review that support a separate E/M service.

When any detail is missing, the coder has to guess, so a short fracture template with required fields pays for itself quickly.

Example: Fracture Care Billing Guidelines in Action

Consider a hypothetical patient who falls on an outstretched hand. The urgent care provider orders X-rays, finds a nondisplaced distal radius fracture, applies a short arm splint and refers the patient to orthopedics within the week.

  1. E/M visit with modifier 25: the evaluation goes beyond the splint work, since it covers the exam, imaging review and referral decision.
  2. 29125: short arm splint, static, with supply code Q4021–Q4024 for Medicare.
  3. Wrist X-ray: billed with the code for the views taken, because imaging is not part of the splint or fracture package.
  4. Diagnosis S52.501A: initial encounter for a closed fracture.

Now change one fact. If the provider documents closed treatment and plans to manage the fracture herself, she bills 25600 with no separate splint code. If she treats the fracture but expects orthopedics to handle the follow-up, she bills 25600 with modifier 54, and the orthopedist bills 25600 with modifier 55.

Common Fracture Care Billing Denials and How to Prevent Them

  • Splint code billed with a fracture treatment code. The first splint is part of the global package.
  • Missing modifier 54. A 90-day code without it suggests the clinic will provide the follow-up, which conflicts with the orthopedic claim.
  • Modifier 25 on a 90-day procedure. Use modifier 57 for the decision to treat instead.
  • Cast removal billed for your own cast. Codes 29700–29750 apply only to casts that another group applied.
  • Several fracture codes under one splint. Under NCCI, when one splint treats several closed fractures without manipulation, report only one closed treatment code. The same rule allows one unit of 26600 per hand and one unit of 28470 per foot, however many bones broke.
  • A 29000-series code for an off-the-shelf brace. Bill the device under its supply code instead.

Most of these errors start in the note, not the claim. So build fracture care billing guidelines into templates that ask the provider to choose a path, and review a sample of fracture claims each month through medical coding audit services. Practices with heavy fracture volume often pair urgent care billing with orthopedic RCM services, so both sides of a shared global package match.

Applying Fracture Care Billing Guidelines Every Day

Good fracture billing starts with one clear decision in the chart: splint and refer, or treat the fracture. Then the codes, modifiers, supplies and 7th characters follow from that choice, and each practice collects for the care it actually gave.

Are fracture claims coming back denied or underpaid? Steady Medical Billing will review a sample of your urgent care fracture and splinting claims and show you what to fix, at no cost. Request your free RCM audit.

Frequently Asked Questions

How do you bill for fracture care in urgent care?

First decide whether the provider treated the fracture or only stabilized it. Definitive treatment uses a closed fracture code, such as 25600, with a 90-day global period. A temporary splint before an orthopedic referral uses an E/M visit, a splint code such as 29125, and supplies.

Can you bill an E/M visit with fracture care?

Yes, in two cases. Add modifier 57 when the visit led to the decision to treat a fracture with a 90-day global code. Add modifier 25 when the visit is separately identifiable from a splint application.

What is the CPT code for a long arm splint?

CPT 29105 reports a long arm splint from the shoulder to the hand. A short arm splint from the forearm to the hand is 29125 when static and 29126 when dynamic.

When should urgent care use modifier 54?

Use modifier 54 on a 90-day fracture code when the clinic treats the fracture but does not plan to provide the follow-up care. The orthopedist who takes over bills the same code with modifier 55.

When do you use 7th character A versus D for a fracture?

Use A while the patient receives active treatment, including the first orthopedic visit that starts definitive care. Use D for routine healing visits, such as cast changes, splint removal and healing X-rays.

Table of Contents

Schedule a Consultation